How To Change Boot Logo/Splash Image Of Your Android Phone

In my previous article "How to change boot animation of Cherry Mobile Flare", I've shown you how to change the boot animation of your phone, and now I will show you how to customize the boot logo or splash image of your Android phone by following simple steps.

How To Change Boot Logo/Splash Image Of Your Android Phone

Preliminary steps:
  • Rooted phone. If your phone is not yet rooted, follow the steps here.
  • Download this TOOL and extract it to your computer.
  • Prepare your desired image to be used as the splash image using your favorite image editing program. I used Photoshop to create my image and set the size to 480 x 800 pixels since I am using Cherry Mobile Flare.
    *The image size depends on the display resolution of your phone.
  • Boot your phone into Fastboot mode and connect it to your computer using its USB cable.
    *To boot Cherry Mobile Flare into Fastboot: turn it off > hold down Volume Up + Power buttons at the same time until you see the green screen then release the buttons

Steps in changing boot logo of your Android phone:
  • Run the Android AIO Flasher
  • Click the Splash Image Maker tab
  • Set the following fields:
    Conversion Method: ffmpeg
    Resolution: (depends on your phone)
  • Click "Browse" and select the image you want to set as the splash image
  • Click "Convert"
  • Check "In Fastboot Mode?"
  • Click on "Flash the Spla$h" button
  • Click Ok, then Ok again
  • Go to the AIO Flasher Tab
  • Select "From Fastboot" under Reboot Menu
  • Click "Reboot" button
  • Wait for your phone to reboot and you should be able to see the boot logo / splash image you set
You may also want to check out How to change boot animation of Cherry Mobile Flare.

If you enjoyed this article and wish to receive more great articles from me then don't forget to subscribe to my regular Email Updates to receive Latest Articles in your Mailbox. You can share your thoughts and insights by using the comment form below.

Recommended Articles:

Software 7096296686770426820

Post a Comment

  1. how to install FM radio here at flare cherry
    mobile. thanks

    ReplyDelete
  2. im having issue running the AIO Flasher. it says .net initialization error and I need to 0.4 v of a certain framework. Can you help me how to fix this?

    ReplyDelete
  3. pwede po ba ito sa cherry mobile burst?

    ReplyDelete
  4. @AnonymousDownload and install this FM Radio app. > Download

    ReplyDelete
  5. @AnonymousIt would be better if you'll tell the exact error message, also provide the OS of the pc you're running it from.

    ReplyDelete
  6. @France AbariciaPwede po, just match the boot image size to your phone's display resolution.

    ReplyDelete
    Replies
    1. sir... dba 480x800 din nmn cm burst... bakit poa ala nagbago? followed nmn lhat ng steps... puro succes nmn... bkit burst parin bootimg ko?

      Delete
  7. thanx nagawa ko na.. salamat uli sir marvs..

    ReplyDelete
  8. is it ok to put 400x400 pixels in flare?

    ReplyDelete
  9. ayaw gumana ng custom boot logo skin
    bkit kaya?

    ReplyDelete
  10. @DeSilvaHonestly di ko na-try, baka maging stretched-out ung image. Pero madali namang palitan just in case.

    ReplyDelete
  11. @James DinoWhat unit? at may error message ba o ano ung size ng image?

    ReplyDelete
  12. Sir mavs, di ko pa din mapagana sa CM Flame ko. when i conducted a research.. nsa boot.img daw ung boot splash nito. Request po sana ako magpachange ng boot splash. salamat po.

    ReplyDelete
  13. sir error po with AIO flasher. it says "to run this application, you must first install the ff versions of the .NET framework v4.0.30319. Contact your application publisher for instructions about obtaining the appropriate version of the .NET Framework"... OS ko po is w7. tinry ko po i.run as XP compatible, pero ayaw pa rin po. thanks!

    ReplyDelete
  14. @aimee monteverdeHead out to this Microsoft page to install .NET framework v4.0.30319.

    ReplyDelete
  15. @AnonymousAutomatic dapat yung pag-update ng splash image after you click on "Flash the Spla$h"

    ReplyDelete
  16. thank you po sir! try ko kung okay na. ;)

    ReplyDelete
  17. C:\Users\Charles Ryan\Desktop\tools>fastboot flash splash Custom_splash.img
    'fastboot' is not recognized as an internal or external command,

    operable program or batch file.
    C:\Users\Charles Ryan\Desktop\tools>
    C:\Users\Charles Ryan\Desktop\tools>fastboot reboot
    'fastboot' is not recognized as an internal or external command,

    operable program or batch file.
    C:\Users\Charles Ryan\Desktop\tools>


    = anu po problema nito sir? ulit na ako ng ulit ganito parin eh.. salamat..

    ReplyDelete
  18. @akosicharlesAno OS ng PC? If its Windows 7 or 8, try running the tool in compatibility mode for WinXP. It's also possible that your system/security is preventing the program.

    ReplyDelete
  19. The system cannot find the path specified.
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    C:\Windows\system32>
    C:\Windows\system32>cd tools

    C:\Windows\system32>


    sir ask ko lang bakit ganito? what should i do?

    ReplyDelete
  20. problem in running the android aio flasher. is says "To run this application, you first must install the following versions of the .NET Framework: v4.0.030319
    Contact your application publisher for instructions about obtaining the appropriate version of the .NETFramework"

    paano po to? help!

    ReplyDelete
  21. @AnonymousYou just need to install the .NET Framework on your PC. Just head out to the Microsoft website.

    ReplyDelete
  22. FAILED (remote: partition table doesn't exist)

    ReplyDelete
  23. sir may lumalabas po na (generic error occurred in GDI+) pag tapos ko po click convert..may ffmpeg.exe nkalagay sa tools folder, panu poh kaya to?

    ReplyDelete
  24. Bakit po ganun sa akin pagkaconvert ko sabi "you need to download ffmpeg.exe and place it in tools folder"

    ReplyDelete
  25. ,kuya pa help naman po please po,sa Root po ng CM Cruize tulongannyo naman po ako please...add ko po kayo sa fb ano po full name nyo..salamat po.

    ReplyDelete
  26. Boss marvs, d po gumana sa CM Burst, burst parin nka lagay. Image details : 480x800 resolution, 300 dpi horizontal/vertical res., 24 bit depth,
    sRGB color representation, edited in photoshop CS6. no errors/issues, successful lahat, pati yung flash. OS win7 ultimate x64 used...

    ReplyDelete
  27. sir may lumalabas po na (generic error occurred in GDI+) pano kaya ito?

    ReplyDelete
  28. Sir, ayaw mag flash. Ano dapat gawin?

    ReplyDelete
  29. FAILED (remote: partition table doesn't exist)

    ReplyDelete
    Replies
    1. pre,na solve muh b toh? same tau prob eh..tnx!

      Delete
  30. sir may lumalabas po na (generic error occurred in GDI+) sir panu yan/////????????

    ReplyDelete
  31. thank you sir....ayos na po nagawa ko na....thank u soo much

    ReplyDelete
  32. good morning
    sir i tried this on my flame2.0
    ito ang lumabas:

    writing 'splash'...
    FAILED (remote: partition table doesn't exist)
    finished. total time: 0.073s
    C:\Users\Partners\Desktop\Android_AIO_Flasher\tools>fastboot reboot
    rebooting...


    finished. total time: 0.001s
    C:\Users\Partners\Desktop\Android_AIO_Flasher\tools>

    may kinalaman kaya ang kernel dito?

    ReplyDelete
  33. @Anonymous SEARCH GOOGLE .NET FRAMEWORK LATESt ;)

    ReplyDelete
  34. it can be use for all model jelly bean android phones?

    ReplyDelete
  35. help !!! https://www.facebook.com/photo.php?fbid=470496306376506&set=gm.265886850217575&type=1&theater

    ReplyDelete
  36. sir pde pa help po sa Generic GDI + error ayaw po nya gumana

    ReplyDelete
  37. Sir pahelp nmn po d po mbsa nung laptop ung device pag naka fastboot mode? May missing drvers po b ako? Stock prin po rom ung flare ko.. Kakaroot plang po..

    ReplyDelete
  38. will this work on jelly bean os?

    ReplyDelete
  39. Sir, panu po tanggalin yung boot logo...
    gusto ko po kasi yung animarion nalang sana..

    ReplyDelete
  40. i tried this on my CM Flare JB 4.1.2 (rooted) and this was the result:

    writing 'splash'...
    FAILED (remote: partition table doesn't exist)
    finished. total time: 0.073s

    Can you please help me go about this problem? Thanks.

    ReplyDelete
  41. sir d ko po ma convert ung pics bsta sabi "u need to download ffmpeg.exe and place it in tools folder"..pa help nman sir.. tnx

    ReplyDelete
  42. i am getting this msg Failed remote signature verify fail. Phone reboots but yet no custom splash screen is showing just same old nasty HTC evo logo ewww please help thanks

    ReplyDelete
  43. pwedeko bang gawin to sa cherry mobile burst 2.0

    ReplyDelete
  44. Hindi naman na palitan!!! Jelly bean na flare ko

    ReplyDelete

Your feedback is highly appreciated. Unnecessary or irresponsible comments will be deleted immediately. Thank you.

emo-but-icon

Visitors

Recommend on Google

When signing up you will initially receive a confirmation email requiring your approval to complete the subscription.

Recent

Site Stats

Technology & Computers - Top Blogs Philippines
item